I made all of them flush to start with which prompted the tracks to not be extended sufficient, And so the third leaf overlapped the edge of the table by about 1 centimeter. Leaving that additional inch (with the block sticking earlier the tracks) will let you correctly extend the table, insert the third leaf, then drive the table closed right befo
In part of move 6, I employed one of several brackets (II) to turn FF since the mini screwdriver wouldn't fit concerning the shelves. I don't think this phase can be completed away from buy, so you just really have to make because of. It a little bent the bracket, but there needs to be a single added within the spare sections bag. In either case, i
5. In move fourteen, when installing the tracks (DD) to your wood blocks (R), provide the picket block adhere out close to an inch earlier the edge of your tracks with the side that will connect to the tip piece (K and the rest). The opposite two blocks need to be flush with the tip from the tracks that attach to the cabinet piece.With many motion,
5. In action fourteen, when putting in the tracks (DD) to your wood blocks (R), possess the wooden block adhere out close to an inch past the sting of the tracks for that side that could attach to the top piece (K and the rest). The opposite two blocks ought to be flush with the tip with the tracks that connect to the cabinet piece.I created all of
I manufactured them all flush to start with which triggered the tracks to not be extended sufficient, Therefore the 3rd leaf overlapped the edge from the table by about a single centimeter. Leaving that further inch (on the block sticking previous the tracks) will help you to appropriately prolong the table, add the third leaf, then drive the table